Changeover switch - modular 63A
Hager modular 63A manual changeover switch is a unique solution for the control between two power supplies.
Developed in order to extend the current range of
modular changeover switch to 63A and meeting
the need to have a changeover switch compatible
with a hager modular enclosure (fitted on DIN rail
clip and for normal safety applications).
modular changeover switch to 63A and meeting
the need to have a changeover switch compatible
with a hager modular enclosure (fitted on DIN rail
clip and for normal safety applications).
Technical Information
63A modular changeover switch can be fitted into anystandard DIN rail mounted enclosure. Its design is
compatible with all other hager modular devices, such
as MCBs and RCCBs. The switch comes in both 2 &
4 pole versions, for single and three phase
applications. The incoming side must be protected
against short circuit and for isolation with an
appropriate MCB 63A minimum 4.5kA curve C.
Comes supplied with a centre-off position.
