63A modular changeover switch |
|
 |
 |
|
|
|
Hager modular 63A manual changeover switch is a unique solution for the control between two power supplies.It has been developed in order to extend the current range of modular changeover switch to 63A.
It meets the need to have a changeover switch compatible with a hager modular enclosure (fitted on DIN rail clip and for normal safety applications). |
| | Technical Information63A modular changeover switch can be fitted into any standard DIN rail mounted enclosure.
Its design is compatible with all other hager modular devices, such as MCBs and RCCBs.
Switch comes in both 2 and 4 pole versions, for single and three phase applications.
The incoming side must be protected against short circuit and for isolation with
an appropriate MCB 63A minimum 4.5kA curve C.
The 63A changeover switch comes with a centre-off position. |
| |
Electrical characteristics |
|
| Reference | SF263 | SF463 |
| | | |
| | |
| Thermal current lth (40°C) |
| | |
| | |
| Rated insulation voltage (Ui) |
| | |
| Rated impulse withstand voltage Uimp |
| | |
| | |
| | |
| | |
| |
For technical information, please login or register |
|
|
|
|
|
|
| |
|
|
|
|
