The simplicity of remote control
The EE806 remote control comes with easy-to-use installer programming & home-owner settings
Remote control technology
Hager's motion detectors have been developed and engineered with the ultimate
innovation - a remote control, which can be used by both the installer and the
home owner. The job can be completed faster by adjusting the settings via
remote control and setting the detectors parameters - such as time, lux and
sensitivity. Then, by handing the remote to the home owner, you provide them
with a new benchmark in lighting control, allowing them to manage their
security and safety at their convenience.
innovation - a remote control, which can be used by both the installer and the
home owner. The job can be completed faster by adjusting the settings via
remote control and setting the detectors parameters - such as time, lux and
sensitivity. Then, by handing the remote to the home owner, you provide them
with a new benchmark in lighting control, allowing them to manage their
security and safety at their convenience.
Installer features
The timer can be set to pulse or set from 5 sec up to 30 min with the remote control.
Lux levels can be set between 5 and 1000 lux
With a press of this button the detector will learn the lux level at that given point in time.
The sensitivity is adjusted from 20% - 100%, according to the amount of movement detected.
Allows the installer to conduct sensor 'pick up' test. Any movement within the detection zone will trigger the detector.
The evolution line of motion detectors have the convenience of de-activating or activating either the frontal or downward lens.
Lock the settings buttons while still maintaining the EASY homeowner settings.
This feature registers any movement, a particular benefit when the load has a failure.
Home owner features
Return to programmed settings with a push of this button
Holiday mode provides easy simulation of presence while out.
Manipulate your surroundings with the easy on/off controls.
